Contact Us REQUEST A QUOTE
4555-4565
4555-4565

Carver Bench Top Standard Unheated Presses

12, 25 and 30 Ton Capacity

These Pellet Presses have a 4″ round platen which has centering grooves for proper die alignment. Like the 4350 Series, they both come in two model choices; with or without the die set.  Both Model’s 4555 & 4565 come with a 31mm (3902) die set and the Model’s 4555.L & 4565.L do not come with a die. These two models have a heavy-duty extended base frame with a die storage cavity. Rugged construction to eliminate deflection. Also, an extended daylight opening and stroke for procedures requiring high compaction ratios.  (picture shown with analog gauge, less die set)

REQUEST A QUOTE
  • Manually operated
  • Clamping force 40-50 tons
  • Daylight opening 0″ – 6″
  • Stroke 6”
  • Fully enclosed hydraulic unit
  • Two (2) fully threaded columns
  • 3.5” round top platen
  • 4” round bottom work area (black oxide coated for corrosion resistance)
  • Front mounted (0-80,000 lb & 0-100,000 lb) Analog pressure gauge (digital gauge also available)
  • Front mounted pump for easy application of full tonnage
  • Special features, including:
    • Polycarbonate safety shield with latch
    • Upper platen with concentric circles for die alignment
    • Black oxide coated for corrosion resistance
    • Evacuation port for connection to an existing vacuum source
  • Paint: Carver gray two-tone
  • Removable pump handle
  • Dimensions: 32.5”L-R x 15”F-B x 31.2”H (uncrated)
  • Weight: 400-420 pounds (uncrated)
  • Force Calibration Certificate using equipment traceable to NIST (part #1525.0001) [each]
  • Floor stand 19″L-R x 19″F-B x 30″H Wt 125# (catalog #223219D)
  • Floor stand 36″L-R x 26″F-B x 30″H W/6″ Casters Wt 260# (catalog #223229C)
  • Pump and Reservoir (catalog #3789)
  • Carver Special Hydraulic Fluid (Oil) (part #2170)
  • 1/8 HP Vacuum pump (catalog #3874)
  • Evacuable 6mm Pellet Die Set (catalog #4417)
  • Evacuable 12mm Pellet Die Set (catalog #4946)
  • Evacuable 13mm Pellet Die Set (catalog #3619)
  • Evacuable 25mm Pellet Die Set (catalog #4369)
  • Evacuable 31mm Pellet Die Set (catalog #3902)
  • Evacuable 40mm Pellet Die Set (catalog #3876)
  • Digital Gauge for the 40 ton (catalog# 6306.PN53 100 lb or 6306.PN52 10 lb)
  • Digital Gauge for the 50 ton (catalog# 6306.PN63 100 lb or 6306.PN62 10 lb)
    • Easy read LCD Round Gauge Face
    • Back mounted for Manual Pellet Presses only
    • Battery powered
    • Readings generate in 100 or 10 pound increments on 80,000 and 100,000 pound gauge
    • Approx. accuracy: +/- 1% of reading between 1,000 lbs. to 80,000 & 100,000 lbs. Force