4350.L Unheated Press
4350.L Unheated Press

Carver Bench Top Standard Pellet Presses

12, 40, and 50 Ton Capacity

Model 4350 Bench Top Laboratory Pellet Press

Pellet press with 4″ round platen which has centering grooves for proper die alignment. This pellet press comes in two model choices; Model 4350 which comes with a 13mm (3619) die set and the Model 4350.L which does not come with a die. This press has a small footprint which makes it compact for field use. (picture shown with analog gauge, less die set)

  • Manually operated
  • Heavy-duty extended base frame with die storage cavity
  • Rugged construction to eliminate deflection
  • Extended daylight opening and stroke for procedures requiring high compaction ratios
  • Clamping force 12 tons
  • Daylight opening 0″ – 5.5″
  • Stroke 5-1/8”
  • Fully enclosed hydraulic unit
  • Two (2) fully threaded columns
  • 3.5” round top platen
  • 4” round bottom work area (black oxide coated for corrosion resistance)
  • Front mounted (0-24,000 lb) Analog pressure gauge (digital gauge also available)
  • Front mounted pump for easy application of full tonnage
  • Special features, including:
    • Polycarbonate safety shield with latch
    • Upper platen with concentric circles for die alignment (Black oxide coated for corrosion resistance)
    • Evacuation port for connection to an existing vacuum source
    • Paint: Carver gray two-tone
    • Removable pump handle
  • Dimensions: 10.25”L-R x 15”F-B x 23”H (uncrated)
  • Weight: 115 pounds (uncrated
  • Force Calibration Certificate using equipment traceable to NIST (part #1525.0001) [each]
  • Floor stand 19″L-R x 19″F-B x 30″H Wt 125# (catalog #223171D)
  • Floor stand 36″L-R x 26″F-B x 30″H W/6″ Casters Wt 260# (catalog #223215C)
  • 12 ton hydraulic unit repair kit (catalog #3729)
  • Carver Special Hydraulic Fluid (Oil) (part #2170)
  • 1/8 HP Vacuum pump (catalog #3874)
  • Evacuable 6mm Pellet Die Set (catalog #4417)
  • Evacuable 12mm Pellet Die Set (catalog #4946)
  • Evacuable 13mm Pellet Die Set (catalog #3619)
  • Evacuable 25mm Pellet Die Set (catalog #4369)
  • Evacuable 31mm Pellet Die Set (catalog #3902)
  • Evacuable 40mm Pellet Die Set (catalog #3876)
  • Digital Gauge (catalog# 6306.PN23 100 lb or 6306.PN22 10 lb)
    • Easy read LCD Round Gauge Face
    • Back mounted for Manual Pellet Presses only
    • Battery powered
    • Readings generate in 100 or 10 pound increments on 24,000 pound gauge
    • Approx. accuracy: +/- 1% of reading between 1,000 lbs. & 24,000 lbs. Force