Bench Top Manual Press
Standard Unheated
Carver has several models of standard unheated manual bench top laboratory presses in 12, 25 and 30 ton capacities. These lab presses are for pelletizing, rosin and fluid extraction, pressure forming and destructive testing and other testing procedures.
Force calibration (p/n 1525.00001) by instruments traceable to NIST are available for new equipment and new gauges. For existing equipment/gauges, please contact our Service Department to set up a Return Authorization Number by calling 260-233-6900 or email wabashservice@acscorporate.com for details.
Bench Top Manual Press
Bench Top Manual Press
Product Images
Genesis Series presses are state-of-the-art hydraulic presses for compression molding of rubber, plastics and composites; and for laminating and bonding or pressure applications where positive ram control is needed. The Genesis Series reflects more than a half a century of Wabash leadership in hydraulic press design and construction. It is rugged enough for round-the-clock performance on the production floor, but works equally well as a precision laboratory press.
Genesis presses are available in 15 through 150 ton capacities. The hydraulic system produces faster closing and opening speeds, making it ideal for use with many of today’s advanced molding compounds. Optional heated platens are available for 500
Specifications of the Bench Top Manually Unheated Mini C 3850 Model Press:
- Adjustable clamp force: 15 to 150 tons
- Programmable controller with access module
- Automatic transfer from closing to pressing speed
- Closing speed 70-90 IPM
- Pressing speed 5 IPM
- OSHA approved operating system
- Pressure adjustment valve
- Integral hydraulic system with high-efficiency TEFC motor, reservoir, gauge & water-cooled heat exchanger
- Electrical supply: 460/3/60 (other voltages available)
While standard Wabash Vantage Presses handle a broad range of applications and can be upgraded or performance-enhanced with available options, your unique requirements may call for a “customized” press. Consult your Wabash representative for more information about “customization ” for your particular needs.
Optional Features:
- Clamp forces available from 15 to 150 tons
- Adjustable daylight opening (daylight varies by model)
- Steel platens, machined flat and parallel within + .001” in/ft
- Platen size: 15″ x 15″ to 48″ x 48″
- Programmable controller with HMI
- Cycle counter thru PLC
- Automatic transition from closing to pressing speed
- Closing speed 45 to 100 IPM (depending on model)
- Pressing speed 3 to 5 IPM (depending on model)
- OSHA approved operating system
- Pressure relief valve with analog pressure gauge
- Integral hydraulic system with high-efficiency TEFC motor, reservoir & water-cooled heat exchanger
- Clamp area guards with keyed interlock
- Electrical supply: 460/3/60 (other voltages available)